Explore Project & Publication

Provide a short description of categories listed below.

Separator slenderness Project

ERDF funded this Project to investigate the effect of the slenderness ratio (L/D) on the performance of a three-phase separator for constant retention times in the oil phase. To determine the controlling parameters of separation efficiency.

Microbubble Measurement project

Microbubble generators are of considerable importance to a range of scientific fields from use in aquaculture and engineering to medical applications. This is due to the fact the amount of sea life in the water is proportional to the amount of oxygen in it

The heat exchanger project was undertaken with the objective of utilizing different materials from the current design to enhance efficiency.

Heat Exchanger project

Affect of droplet size and distribution for separator Project

The droplet size distribution determines the fraction of recoverable oil, as any droplets smaller than the set droplet diameter used for design will not be recovered.

Twin-Venturi microbubble generator Project

The project developed low cost and low power consumption microbubble generator to improve the mass transfer of gas to liquid. Microbubble aeration used in aquaculture to improve dissolve oxygen level, water recycling through dissolved air flotation (DAF), oil refinement and reduction of skin friction on ship Hull

Developed a visualizing software in multiphase Project

We give this software a  flow_vis which  Accurate visualization of bubbles in multiphase flow is a crucial aspect of modeling heat transfer, mixing, and turbulence processes. It has many applications, including chemical processes, wastewater treatment, and aquaculture.